发新帖
查看: 1139|回复: 3

[其他] HGW新品预告(148029)-1/48 Bf109G-6凸起铆钉水贴套装配田宫

[复制链接]
发表于 7 天前 | 显示全部楼层 |阅读模式
001.jpg 002.jpg
HGW models has released a 1/48 scale decal set replicating the raised rivets on the Bf109G-6
”Complete pack of positive rivets for Bf109G-6. Riveting sets from HGW Models give to surfaces of plastic kits highly realistic look. We recommend to apply them under the paint and when your model is painted just polish the surface to make the accessory visible. Suitable for Tamiya kit.
In general, riveting sets serve for riveting of plastic model aircraft kits. By using HGW sets it takes cca 3 hours to rivet whole aircraft in 1:32 scale and 2 hours for 1:48 scale. Result is completely precisely riveted model kit which is prepared for painting and any other final works. We used Japanese documents for preparation of our riveting sets - seemed to be the most serious. The biggest problem was to harmonize the form of real aircraft with its minimized form which is different depending on the variety of producers. For this reason you don´t have to modify (abrade/cut/whatever) any part of your plastic model. We´ve been worked with 0,1 mm tolerance and it just fits perfectly.

INSTRUCTIONS
●Clean model surface by wet cloth. Optional undercoat is Mr. Surfacer 1000 or Base White.
●Cut each design out of decal sheet and dip them in warm water (30 - 40°C) for 10 - 15 seconds.
●Check with finger tip if design loose on base paper. If so place it in proper position on model and slide of base paper leaving design on model.
●Apply Mr. Mark Softer for undercoat. Move design to exact position with wet fingertip and push out excess of Mr. Mark Softer, water and air bubbles which are under the decal - use soft cotton cloth.
●Let the decal dry for cca 2 hours.
●Unstick the foil carefully and wash marks caused by trasfer glue.”

148029 - Bf109G-6 Riveting Decal Set – 1/48


发表于 7 天前 | 显示全部楼层
这个有创意  很有特色 其实比凹钉真实
来自安卓客户端来自安卓客户端
回复

使用道具 举报

发表于 7 天前 | 显示全部楼层
个人还是更习惯用锡珠呢
回复

使用道具 举报

发表于 6 天前 | 显示全部楼层
有意思的东西。
回复

使用道具 举报

发新帖
    您需要登录后才可以回帖 登录 | zc注册  

    本版积分规则

    小黑屋|Archiver|模型岛 ( 苏ICP备14025939号|网站地图 

    Powered by Discuz! X3.2  © 2001-2013 Comsenz Inc.

    快速回复 返回顶部 返回列表